Rear set Suzuki GSX-R1000 (17-23)

Availability:

In stock

Availability:

In stock

Availability:

In stock

Availability:

In stock

Availability:

In stock

Availability:

In stock

Availability:

In stock

Availability:

In stock

SKU:

RXS11B-SBF

SKU:

RXS11B-SSS

SKU:

RXS11B-SBS

SKU:

RXS11B-LSS

SKU:

RXS11B-LBS

SKU:

RXS11B-SSF

SKU:

RXS11B-LSF

SKU:

RXS11B-LBF

Footpeg variant:
Footpeg color:
Toe peg variant:

€ 474,32 With VAT

€ 392 Without VAT

€ 442,86 With VAT

€ 366 Without VAT

€ 447,7 With VAT

€ 370 Without VAT

€ 442,86 With VAT

€ 366 Without VAT

€ 447,7 With VAT

€ 370 Without VAT

€ 469,48 With VAT

€ 388 Without VAT

€ 469,48 With VAT

€ 388 Without VAT

€ 474,32 With VAT

€ 392 Without VAT

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 72mm black color footpeg
  • folding toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 72mm silver color footpeg
  • fixed delrin toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 72mm black color footpeg
  • fixed delrin toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 80mm silver color footpeg
  • fixed delrin toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 80mm black color footpeg
  • fixed delrin toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 72mm silver color footpeg
  • folding toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 80mm silver color footpeg
  • folding toe peg
  • 6 footpeg positions

For the R variant (with blipper), GP/reverse shift pattern cannot be used without replacing the OEM quickshifter for a more compact one

  • original or GP/reverse shift pattern
  • 80mm black color footpeg
  • folding toe peg
  • 6 footpeg positions

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

We design rear sets with four key areas in mind: functionality, durability, design and simplicity of which the functionality is the most prominent. Our rear sets provide excellent feedback for the rider allowing him to push his bike to the absolute limit. We manufacture our rear sets from EN AW – 7075 T6 aluminium billet, which provides exceptional durability and rigidity compared to the OEM rear set. The main parts' surface is anodized to achieve a hard black finish for additional protection against scratches and environmental influences.

This rear set can be used for both types of shifting (you can switch between original and GP/reverse shift patterns)

The RX series is equipped with a system that allows the footpeg to be adjusted to one of 6 positions. All it takes to adjust the position of the footpeg is undoing one screw.

The design of the footpeg is the result of long-term testing in WorldSBK. Footpegs feature an anti-slip teeth pattern that guarantees maximum grip even in wet conditions. In case of an accident, footpegs also help to protect the engine and gearbox covers and the main frame of the motorcycle. The tip breaks off, and the rest of the peg serves as a slider. All that is required to change a broken footpeg is to undo one bolt.

With simplicity and ease of repair in mind, we make our rear sets from the fewest parts possible. The fewer parts there are, the less can go wrong.

A brake sensor can be purchased with each set to maintain the functionality of the brake light. The sensor is mounted directly on the rear brake master cylinder.

All spare parts are available here at our website.

All fields marked with * are required.

Related products

RSUP-07-012_frontview
€ 19,36